PowerHome Messageboard: Windows Vista?

Active Topics

Memberlist

Help

PowerHome General
PowerHome Messageboard : PowerHome General

Topic: Windows Vista?

Author

Message

<< Prev Topic | Next Topic >>

jjcritch
Newbie
Newbie

Joined: February 06 2008
Location: United States
Online Status: Offline
Posts: 1

Posted: February 06 2008 at 20:31 \| IP Logged

So bhlonewolf and dhoward, where is the "Vista Howto"? Was it ever created?

Here are my issues. Hopefully you can help

I have a 2414S and a Vista computer (onboard 9-pin).

When I install Powerhome (1.03.4.12 beta) and run it I get errors:

SDM3.exe "an error occured in the aplication"

and

"Smarthome device manager ISRESPONDING command failed for Insteon PLC. PLC attempting to restart controller"

If I run your reg key and turn SDM3 run as admin i don't get the first error but I still get the second. It looks like SDM is not communicating with the PLC?

IF I open SDM manually

downloadTimer started
timerActivate not enabled
PLC:isresponding=False
downloadTimer started
timerActivate not enabled
PLC:isresponding=False
downloadTimer started
timerActivate not enabled
PLC:isresponding=False
downloadTimer started
timerActivate not enabled
PLC:isresponding=False

and so on...

Tried all this on a separate Vista machine. Same thing. Is there something I am not doing right with the com port? It is activated in the BIOS. No bent pins. Or is this a problem with Vista and the PLC? Everything works on my XP machine.

Help please...

__________________
My HT Build

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

<< Prev Page of 4

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum