| Author | 
         | 
          
      
        
         
         QuickCarl2K1 Groupie 
          
  
  Joined: June 06 2011 Location: United States
 Online Status: Offline Posts: 41
          | 
        
         
          
           | Posted: December 07 2018 at 06:39 | IP Logged
		     | 
                    
            		  
           | 
           
          
           
  | 
           
          
I created some timed events, all of which are working.  
 However, I had the Setup Sunrise location set 
 incorrectly when they were created.
 
 Now that I have corrected the Sunrise location to the 
 correct longitude and latitude, the sunrise and sunset 
 times for the events are still not correct.  They seem 
 to still be based on the old location that was ins 
 Setup > Sun.
 
 I have confirmed that the setting was indeed changed 
 (can't use city and state, so manually entered 
 Long/Lat).  Then I re-initialized, confirmed incorrect 
 sunrise/sunset, so exited then restarted. confirmed 
 that the times on the created events are still 
 incorrect.
 
 However, when I change the Timing in the drop down of 
 the Timed Events window, then change it back, it gets 
 the correct times.
 
 
         | 
        
       
        | Back to Top | 
         
          
          
         | 
        
       
       
        |   | 
       
        
         
         dhoward Admin Group 
          
  
  Joined: June 29 2001 Location: United States
 Online Status: Offline Posts: 4447
          | 
        
         
          
           | Posted: December 07 2018 at 18:44 | IP Logged
		     | 
                    
            		  
           | 
           
          
           
  | 
           
          
Carl,
 
 The behavior you're seeing is normal and would be the way to get the times updated properly based upon your current lat and long.
 
 When a timed event is created that is based on Sunrise/Sunset/Dawn/Dusk, the time is calculated based upon the date of the event and the current 
 lat/long settings. When you save your timed event, there is nothing that will go through and recalculate the times should you change the lat/long.
 
 When the timed event runs, if it is recurring, then it will update itself to proper time based upon your current lat/long (just as if you created a 
 new timed event).
 
 So, you would need to go and either change the timing or the date and then back again for all timed events based upon lat/long to get proper values 
 or just wait for them to recalculate automatically (if they're recurring) once they next run (at the wrong time if you didnt change). Once they run, 
 the next run time should be correct for your lat/long.
 
 Dave.
 
         | 
        
       
        | Back to Top | 
         
          
          
         | 
        
       
       
        |   | 
       
        
         
         QuickCarl2K1 Groupie 
          
  
  Joined: June 06 2011 Location: United States
 Online Status: Offline Posts: 41
          | 
        
         
          
           | Posted: December 08 2018 at 06:40 | IP Logged
		     | 
                    
            		  
           | 
           
          
           
  | 
           
          
Thanks Dave.  Got it sorted.
         | 
        
       
        | Back to Top | 
         
          
          
         | 
        
       
       
        |   |       
      | 
    
   
  |