| Author |
|
MrGibbage
Super User
Joined: October 23 2006
Location: United States
Online Status: Offline
Posts: 513
|
| Posted: February 07 2009 at 14:42 | IP Logged
|
|
|
It seems that every time I go into PH now, I have almost every device shaded pink on the device tab and I need to clear failed. Now, I am quite certain that every one of my devices are not failing at the same time, so what else could be wrong? I am on PH 2.1.
Skip
|
| Back to Top |
|
| |
nadler
Super User
Joined: February 25 2006
Location: United States
Online Status: Offline
Posts: 354
|
| Posted: February 07 2009 at 15:09 | IP Logged
|
|
|
Definitely a communication issue. But it is most likely
the PLC/PLM. Try resetting the PLC/PLM and from the
Insteon Explorer clearing and then reloading the
PLC/PLM.
|
| Back to Top |
|
| |
grif091
Super User
Joined: March 26 2008
Location: United States
Online Status: Offline
Posts: 1357
|
| Posted: February 07 2009 at 15:25 | IP Logged
|
|
|
If you are not on 2.1b, upgrade to the latest level. There was a bug at 2.1 where PH was interpreting a condition as an error when it was not. Eventually when the error count exceeds the defined limit the device is shaded red. That problem was fixed by 2.1a but another problem was introduced. Release 2.1b fixed that problem. See ...
Topic: Release 2.1 available
under PowerHome General for the details.
Nadler could well be correct. Most of the time what you describe is a communication issue. However, if not on 2.1b, upgrade to be sure what you are seeing is not the 2.1 bug.
__________________
Lee G
|
| Back to Top |
|
| |
Active Topics 
Memberlist 
Search 
Help
Register 
Login
PowerHome Messageboard : PowerHome General
Topic: Lots of "Clear Failed"
